Where is the oil filter located on a 2002 Mercury Mountaineer?

March 15, 2010

Im actually at this precise moment trying to change my oil and Im not sure where the oil filter is on this specific vehicle. Anyone?! Help!



Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay

{ 2 comments… read them below or add one }

karate09 March 15, 2010 at 1:21 PM

Have you taken the screw out of the oil pan?

1. If you have taken the screw out of the oil pan and have drained the oil pan. Then you should put the screw back in.

2. Now that you have drained the oil pan look either to the righ or to the left of the oil pan. You should see the oil filter. The bottom of it is round on the side of it says Oil Filter.

3. Slowly unscrew the oil filter and let it drain.

4. Replace with a new oil filter.

5. Put your new oil in.

6. Wait about 5 mins after putting the oil and and check your oil to see if it has the right amount of oil in it. If needed add more oil.

7. Crank the vehicle and let it idle for about 15 mins.

I hope this helps! Good luck!

Reply

fearthis_youbetter March 15, 2010 at 1:21 PM

driverside front, above the front end look next to the oil pan and then look up and you will prolly see it….you MAY need to look on the driver side front tire and you might be able to see it, my uncles truck is that way he has a 99 ford f-150..and mountianiers are made by ford motor company so GL

Reply

Leave a Comment

Previous post: I took a Alza 36….was it a bad idea?

Next post: Is a mechanic obligated to fix your car for the amount quoted in an estimate?